水诱导磷化镍腐蚀及腐蚀抑制

过渡金属磷化物作为助催化剂广泛应用于电催化、光(电)催化、电化学储能等领域,但其在水介质中的稳定性研究较少。我们以磷化镍(Ni_xP)作为研究对象,详细研究了所制备的Ni_xP与水的反应行为。研究结果表明： Ni_xP与水反应生成H₂,同时自身被氧化生成PO₄^3-和Ni²⁺,发生严重的化学腐蚀。腐蚀的程度与Ni_xP的晶体结构、元素比例等因素有关。通过在Ni_xP表面沉积NiO、ZnO、TiO₂保护层可显著抑制Ni_xP的化学腐蚀,提高Ni_xP在水介质中的抗腐蚀能力。     

Surface modification of titanium by using plasma‐induced graft‐polymerization

Plasma‐induced graft‐polymerization (PIGP) method was utilized in this study to improve corrosion behavior and biocompatibility of titanium (Ti) surface. Bioactive molecule polyacrylamide (PAM) was immobilized onto Ti surface by introducing silanederivatized spacer arms as an intermediary for the covalent linkage. Ti was firstly activated by O₂ plasma, and oxygen‐containing groups were introduced on its surface consequently. The intermediary mercapto silane spacer molecules were then covalently linked to the oxidated surface, followed by the covalent binding of PAM and the sulfhydryl‐terminal groups via PIGP. Surface analyses following modification process included water contact angles (CA), SEM, attenuated total reflection‐Fourier transform infrared spectroscopy (ATR‐FTIR), XPS and atomic force microscope (AFM). The results revealed the effectiveness of this method on immobilizing PAM to Ti surface, and the hydrophilicity of modified surface improved remarkably. In addition, potentiodynamic polarization and cellular proliferation tests were implemented to validate the enhanced corrosion‐resistance and biocompatibility of modified Ti surface, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

2-十一烷基-N-羧甲基-N-羟乙基咪唑啉在柠檬酸溶液中对碳钢的缓蚀作用

采用失重实验、极化曲线和交流阻抗等方法研究了缓蚀剂2-十一烷基-N-羧甲基-N-羟乙基咪唑啉在质量分数为2%柠檬酸溶液中对碳钢的缓蚀性能。 失重实验表明,该缓蚀剂在柠檬酸溶液中能够有效地抑制碳钢的腐蚀,当其质量分数为0.4%时,缓蚀效率达到86.4%。 极化曲线表明,该缓蚀剂为混合型缓蚀剂,Nyquist图中单一的容抗弧变化表明碳钢电极表面的腐蚀过程主要由电荷转移步骤控制。 该缓蚀剂的吸附行为符合Langmuir吸附等温式,吸附机理是介于物理吸附和化学吸附之间的一种吸附。     

铈和镧对Q345B钢在海洋大气中腐蚀行为的影响

通过周浸实验对普通Q345B钢和含有微量稀土铈(Ce)和镧(La)的Q345 BRE钢在模拟海洋大气腐蚀环境下,进行了耐腐蚀性能比较.利用失重和电化学方法进行两者的腐蚀速率比较,利用SEM和XRD分析了两者腐蚀形貌和锈层的特征.结果表明:加入混合稀土铈和镧的Q345B钢的腐蚀速率小于普通的Q345B钢,且腐蚀形貌也发生...     

制动器管裂纹原因分析

重型汽车制动器管在潮湿的环境中使用时发生破裂,采用化学成分分析、力学性能试验、断口分析和金相分析等方法对破裂的制动器管进行分析.结果表明,制动器管的裂纹主要产生于存在加工应力的弯曲部位,应力腐蚀是造成其破裂的主要原因.同时在选材方面提出建议.     

Prediction of the penetrated rust into the microcracks of concrete caused by reinforcement corrosion

Consider a steel-rust-concrete composite consisting of a circular cylindrical concrete cover and a coaxial uniformly corroding steel reinforcement. Prediction of the amount of rust penetrated into the microcracks of concrete cover from a set of data measured at the surface of the concrete is of particular interest. The steel is assumed to be linear isotropic and rust follows a power law stress–strain relation. For the concrete, anisotropic behavior and post-cracking softening model is employed. The formulations lead to a nonlinear boundary value problem which is solved analytically. A key parameter β, defined as the ratio of the volume of corrosion products inside the cracks to the volume of the cracks, is calculated. With some efforts, this parameter is also extracted from the available theoretical and experimental studies for the purpose of comparison. The effects of the mechanical properties of rust and concrete on β is addressed.     

Q420钢管大气腐蚀后的抗侧撞性能

为研究大气腐蚀对Q420钢管构件服役期内耐撞性的影响,提出了计及腐蚀损伤的材料模型。引入损伤因子（ω）修正Voce模型,推导随腐蚀程度变化的低合金钢材本构方程,并通过加速腐蚀试验结果回归相应参数。利用ABAQUS软件定义构件材料特性,建立起受腐蚀的Q420钢管仿真模型,采用显式动力算法分析多种初始状态下,撞击体与不同腐蚀程度钢管的冲击响应规律。开展预腐蚀Q420钢管的落锤试验,将试验结果与数值计算结果进行对比,验证所建模型的合理性。结果表明:大气腐蚀导致材料名义强度降低,对Q420钢管抗撞击能力影响显著;随着腐蚀程度增加,冲击力峰值减小,撞击时间和深度增加;Q420钢管受腐蚀后抗冲击刚度减小,构件整体变形耗能增加,表明大气腐蚀使其抗冲击性能下降;同等动能增量下,增大撞击体初速度比增加初始质量获得的冲击力峰值增幅更大,而所得到的接触时间增幅更小。     

Determination of Chloride Content in Different Types of Cement Using Laser-Induced Breakdown Spectroscopy

The characterization and accurate determination of the chloride content in cement/concrete is very important for the assessment of the durability and safety of a concrete structure. The available analytical techniques are relatively expensive and time consuming. In this study, a laser-induced breakdown spectroscopy (LIBS) system was used for determination of elemental composition in three different types of cement samples. The plasma was generated by focusing a pulsed Nd: YAG laser at 1064 nm on the cement samples. The concentrations of different elements of significance for structural stability in cement samples were determined. The evaluation of the potential and the capabilities of LIBS as a rapid tool for characterization of cement samples is discussed. The optimum LIBS setup and experimental conditions to detect and measure chloride in building materials are reported. The LIBS results were compared with the results obtained using a standard analytical technique such as inductively coupled plasma emission spectroscopy (ICP–ES). The limits of detection were determined, and calibration curves were measured. The results of this investigation indicate the reliability of LIBS to characterize different cement samples and to assess the chloride content in these cements.     

Surface Analysis of Inhibitor Film Formed by 4-Amino-N-(1,3-thiazol-2-yl) Benzene Sulfonamide on Carbon Steel Surface in Acidic Media

Inhibitive properties of the antibacterial sulfa drug sulfathiazole—IUPAC name being 4-amino-N-(1,3-thiazol-2-yl) benzene sulfonamide—on the corrosion of carbon steel in 1.0 M HCl solution were investigated using weight loss measurements, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Sulfathiazole is a good adsorption inhibitor, and the inhibition efficiency increases with increasing concentration. Adsorption is spontaneous and is best described by Temkin isotherm. XPS analysis showed, at this stage, that the main product of corrosion is a nonstoichiometric Fe³⁺ oxide/oxyhydroxide consisting of a mixture of Fe₂O₃, α, and γ-FeO(OH) and/or Fe(OH)₃, where α, γ-FeO(OH) is the main phase.     

QSAR study on N-containing corrosion inhibitors: Quantum chemical approach assisted by topological index

In this paper, QSAR study on N-containing corrosion inhibitors has been made using quantum chemical approach assisted by a novel topological index (). Two models were obtained and their efficiency was examined using statistics. The results indicate that inhibition efficiencies relate to some parameters of corrosion inhibitors, such as E_homo, polarizability, Dipole, frontier orbital charge density, the interaction mode between inhibitors and metal surface (feedback donor–acceptor coordination bonds), (steric hindrance of molecules). Predicted values are consistent with the experimental ones on the whole. The residuals range within the experimental error. So the models can be used to predict inhibition efficiencies of the same type molecules.